Analysis Lattice Constant of Ceramic SrTiO3 Doped Cuprum(II) Acetate Cube Structure by Cramer-Cohen Method

Pipit Handayani; Fatihatul Mufarrohah; Asih Asih; Vania Rahmawaty; Maya Ary Santi; Anis Munir Rukyati; Ridwan Siskandar; Heriyanto Syafutra; Erdiansyah Pratama; Ardian Arif Setiawan; Irzaman Irzaman

doi:10.26737/jipf.v9i2.5004

Analysis Lattice Constant of Ceramic SrTiO3 Doped Cuprum(II) Acetate Cube Structure by Cramer-Cohen Method

Pipit Handayani, Fatihatul Mufarrohah, Asih Asih, Vania Rahmawaty, Maya Ary Santi, Anis Munir Rukyati, Ridwan Siskandar, Heriyanto Syafutra, Erdiansyah Pratama, Ardian Arif Setiawan, Irzaman Irzaman

Abstract

Analysis of SrTiO₃ ceramics with the doping Cuprum(II) acetate (Cu(CH₃COO)₂), the variation in the concentration of doping used 0%; 0,5%; and 1% using the solid state reaction method was successful. The annealing process is carried out starting from room temperature then raised to an annealing temperature of 850 ^oC with a temperature increase of 1,67 ^oC / minute and held constant for 8 hours. Next proceed with the cooling process until it returns to room temperature for 13 hours. Analysis of XRD data using the Cramer-Cohen method yielded a lattice parameter of 3,909 Å; 3,906 Å; and 3,905 Å, a cubic crystal structure.

Keywords

Lattice Parameters; Solids Reaction, SrTiO3

Full Text:

PDF (English)

References

Khan, A. I., Keshavarzi, A., & Datta, S. (2020). The future of ferroelectric field-effect transistor technology. Nature Electronics, 3(10), 588-597.

Phoon, B. L., Lai, C. W., Juan, J. C., Show, P. L., & Pan, G. T. (2019). Recent developments of strontium titanate for photocatalytic water splitting application. International Journal of Hydrogen Energy, 44(28), 14316-14340.

Neville, R. C., Hoeneisen, B., & Mead, C. A. (1972). Permittivity of strontium titanate. Journal of Applied Physics, 43(5), 2124-2131.

Rofiko, H., & Suryana, R. (2017). Pengaruh Suhu Sintering Pada Pembuatan Strontium Titanat (SrTiO3) Terhadap Konstanta Dielektrik Menggunakan Metode Co-Precipitation. Indonesian Journal of Applied Physics, 7(1), 28-35.

Zaidah, A. (2019). Karakterisasi Kekristalan dan Konstanta Dielektrik Barium Stronsium Titanat (BaxSr1-XTiO3) dengan Variasi Komposisi Barium Dan Stronsium Yang Dibuat Menggunakan Metode Solid State Reaction. JUPE: Jurnal Pendidikan Mandala, 4(4).

Shi, X. L., Wu, H., Liu, Q., Zhou, W., Lu, S., Shao, Z., ... & Chen, Z. G. (2020). SrTiO3-based thermoelectrics: Progress and challenges. Nano Energy, 78, 105195.

Zhao, Q., Feng, G., Jiang, F., Lan, S., Chen, J., Liu, M., ... & Jiang, W. (2020). Comparison of Fe 2 TiO 5/C photocatalysts synthesized via a nonhydrolytic sol–gel method and solid-state reaction method. RSC advances, 10(71), 43762-43772.

Tomar, A. K., Singh, G., & Sharma, R. K. (2019). Charge storage characteristics of mesoporous strontium titanate perovskite aqueous as well as flexible solid-state supercapacitor cell. Journal of Power Sources, 426, 223-232.

Paramitha, T., Utami, K., Anggraini, Y. M., & Paramitha, T. (2023). Sintesis dan Karakterisasi Semikonduktor TiO2 Doping Magnesium dengan Metode Hidrotermal. KOVALEN: Jurnal Riset Kimia, 9(1), 33-42.

Sangur, K., Leiwakabessy, F., Tuaputty, H., Tuwankotta, L. V., Samloy, S. V., Ratila, C., ... & Rumahlatu, D. (2021). Mudskipper as an indicator species for lead, cadmium and cuprum heavy metal pollution in the Mangrove, Ambon, Indonesia. Journal of Ecological Engineering, 22(4), 1-19.

Khorrami, G. H., Zak, A. K., & Kompany, A. (2012). Optical and structural properties of X-doped (X= Mn, Mg, and Zn) PZT nanoparticles by Kramers–Kronig and size strain plot methods. Ceramics International, 38(7), 5683-5690.

Abd-Elnaiem, A. M., Mahmoud, A. Z., & Moustafa, S. (2021). Structural and optical properties of thermally evaporated and annealed Ge20Se76Sn4 thin films. Optical Materials, 111, 110607.

Irzaman, Siskandar, R., Nabilah, N., Aminullah, Yuliarto, B., Hamam, K. A., & Alatas, H. (2018). Application of lithium tantalate (LiTaO3) films as light sensor to monitor the light status in the Arduino Uno based energy-saving automatic light prototype and passive infrared sensor. Ferroelectrics, 524(1), 44-55.

Sinaga, Z., & Joniwarta, J. (2020). Analisis ukuran kristal dan sifat magnetik melalui proses pemesinan milling menggunakan metode karakterisasi xrd, mechannical alloying, dan ultrasonik tekanan tinggi pada material barium hexaferrite (Bafe12o19). Jurnal Kajian Teknik Mesin, 5(1), 9-14.

Maghfury, T. I., & Anggono, A. D. (2020). Analisis X-Ray Diffraction (XRD) Pada Brazing Aluminium Seri 1000 Dan Stainless Steel Seri 304 Dengan Penambahan Serbuk Tembaga (Doctoral dissertation, Universitas Muhammadiyah Surakarta).

Irzaman, Dahrul, M., Rahmani, M., Rukyati, A. M., Deswardani, F., Peslinof, M., Jenie, R. P., ... & Siskandar, R. (2024). Design and fabrication of photovoltaics based on MFS (Ag/BaTiO3/silicon p-type) structure. Materials Science for Energy Technologies, 7, 29-34.

DOI: http://dx.doi.org/10.26737/jipf.v9i2.5004

Refbacks

There are currently no refbacks.

Copyright (c) 2024 Pipit Handayani, Fatihatul Mufarrohah, Asih Asih, Vania Rahmawaty, Maya Ary Santi, Anis Munir Rukyati, Ridwan Siskandar, Heriyanto Syafutra, Erdiansyah Pratama, Ardian Arif Setiawan, Irzaman Irzaman