Critical Study of Research Results about TVET and TEFA’s Role in Social, Economic, and Education Development in the Country

Euis Ismayati; Supari Muslim; Nita Kusumawati; Erina Rahmadyanti; Moch Alfin Hilmi; Tri Wrahatnolo

doi:10.26737/jetl.v5i1.1823

Critical Study of Research Results about TVET and TEFA’s Role in Social, Economic, and Education Development in the Country

Euis Ismayati, Supari Muslim, Nita Kusumawati, Erina Rahmadyanti, Moch Alfin Hilmi, Tri Wrahatnolo

Abstract

This study aims to determine the role of Technical Vocational Education and Training (TVET) and Teaching Factory (TEFA) on social, economic, and educational development in a country. The study was conducted using a literature review of some references and relevant research results of European countries, the United States (US), Africa, and Asia, especially in Indonesia. The results of the study obtained were presented in the Focus Group Discussion (FGD) to obtain input and criticism to improve the results of the research. The study concluded that: (1) TVET has a key and key role in the social, economic, and educational fields of a country; (2) the impact of TVET in Nigeria and other developing countries, in general, has not been impressive; (3) the application of TEFA has a positive and significant effect on work readiness of vocational students; and (4) the application of TEFA can contribute to the social, economic and educational development of a country.

Keywords

TVET; TEFA; Social; Economy; Education; Country

Full Text:

PDF

References

Akhuemonkhan, I., Raimi, L. & Dada, J.O (2014). Impact of quality assurance on technical vocational education and training in Nigeria. Afro Asian Journal of Social Sciences, 5(5.2) Quarter II 2014 ISSN: 2229 – 5313.

Alam, N. (2015). The role of technical vocational education and training in human development: Pakistan as a reference point. European Scientific Journal, 11(10). ISSN: 1857 –7881 (Print), e -ISSN 1857- 7431.

Alptekin, S. E., Pouraghabagher, R., Quaid, P. M., & Waldorf, D. (2001). Teaching factory Proceedings of the 2001 American Society for Engineering Education Annual Conference and Exposition, Cal Poly, San Luis Obispo. http://digitalcommons. calpoly.edu (Accessed on August 20, 2016).

Chryssolouris, G., Mavrikios, D., Mourtzis, D. (2013). Manufacturing Systems: Skills & Competencies for the Future. Procedia CIRP, Keynote paper of the 46th CIRP Conference on Manufacturing Systems 2013, 7, 17-24.

Dewi, S.S., & Sudira, P. (2018). The Contribution of teaching factory program implementation on work readiness of vocational high school students in Makassar. Journal of Educational Science and Technology, 4(2), 126-131. DOI: http://dx. doi.org/10. 26858/est.v4i2.6434.

Direktorat Pembinaan SMK-Departemen Pendidikan Nasional (2009). Roadmap pengembangan SMK 2010-2014. Jakarta: Departemen Pendidikan Nasional.

Fajaryati, N. (2012). Evaluasi Pelaksanaan Teaching Factory SMK di Surakarta. Jurnal Pendidikan Vokasi, 2(3), 325-337.

Hadlock, H., Wells, S., Hall, J., Winowich, J. C. N., & Burns, J. (2008). From Practice to Entrepreneurship: Rethinking the Learning Factory Approach. Proceedings of The 2008 IAJC-IJME International Conference, ISBN 978-1-60643-379-9.

IMF (International Monetary Fund). (2013). World Economic Outlook – Hopes, Realities, Risks, World Economic, and Financial Survey. April 2013. http://www.imf.org/external/pubs/ft/weo/2013/01/ pdf/text. pdf.

Indrawati, E.M. (2017). Peningkatan pencapaian kualitas lulusan D-3 Teknik Elektro dengan model teaching factory. Jurnal Penjaminan Mutu, Universitas PGRI Kediri, 43-52.

Johnson, E. B. (2014). CTL-Contextual teaching & learning. Bandung: Kaifa.

Lamancusa, John, S., Zayas, Jose, L., Soyster, Allen L., Morell, Lueny, Jorgensen, & Jens. (2008). The learning factory, industry-partnered active learning. Journal of Engineering Education.

Lamancusa, Jorgensen, Zayas, C., John S., Jens E., & Jose, L. (1995). The learning factory: a new approach to integrating design and manufacturing into engineering curricula. ASEE Proceedings, Anaheim, California, 2262.

Lucyana, Tunas, B., Sunaryo, W. (2017). Evaluation of teaching program at industrial vocational high school of industrial education and training center ministry of industry. International Journal of Innovative Research in Science, Engineering, and Technology (A High Impact Factor & UGC Approved Journal), 6(9). Doi:10.15680/ IJIRSET .2017.0609 001.

Manufacture High Level Group and Implementation Support Group. (2006). ManuFuture Platform - Strategic Research Agenda. Assuring the future of manufacturing in Europe 2006.

Mavrikios, D., Papakostas, N., Mourtzis, D., Chryssolouris, G. (2011). On industrial learning & training for the factories of the future: A conceptual, cognitive & technology framework. Journal of Intelligent Manufacturing, Special Issue on Engineering Education 2011, 24(3), 473-485.

Muslim, S. (2013). Tes Kinerja (performace test) dalam bidang pendidikan teknologi dan kejuruan. Makalah disampaikan pada seminar teknik elektro dan pendidikan teknik elektro, Desember, 2013.

Muslim, S., Gitama, N., Suprianto, B., Rahmadyanti, E., & Kusumawati, N. (2018a). Influence of learning media based on adobe flash professional to psychomotor domain learning outcomes on plc courses viewed from level of creative thinking student. Jurnal Pendidikan Vokasi, 8(3), 267-276.

Muslim, S., Suprianto, B., Gitama, N. P. (2018.b). Development Module (Lab Report) As a Media of Learning in Vocational Education Viewed by Gender. ICVEE IOP Publishing IOP Conf. Series: Materials Science and Engineering, 336, 012035 doi:10.1088/1757-899X/336/1/ 01 2035.

Nasir, S.B. (2012). Strategy to revitalize technical and vocational education and training (TVET): management perspectives. Global journal of management and business research, 12(23). Version 1.0, the Year 2012 Type: Double Blind Peer Reviewed International Research Journal. Publisher: Global Journals Inc. (USA) Online ISSN: 2249-4588 & Print ISSN: 0975-5853.

Nurtanto, M., Ramdani, S.D., Nurhaji, S. (2017). Pengembangan model teaching factory di Sekolah Kejuruan. Prosiding Seminar Nasional Pendidikan FKIP-UNTIRTA 2017, ISBN 978-602-19411-2-6.447.

Pradana, D.H.E., dan Yoto, S. (2018). Manajemen pelaksanaan teaching factory dalam mempersiapkan lulusan memasuki dunia kerja siswa SMK Muhamadiyah 7 Gondanglegi. Jupedasmen, 4(1), 97.

Prosser, C.A. & Quigley, T.H. (1950). Vocational Education in Democracy. Chicago: American Technical Society.

Rentzos, L., Doukas, M.E., Mavrikios, D., Mourtzis, D., & Chryssolouris, G. (2014). Integrating manufacturing education with industrial practice using Tefa paradigm: A construction equipment application. Proceedings of the 47th CIRP conference on manufacturing systems, 17, 189–194.

Sharan, S. (2012). The handbook of cooperative learning: Inovasi pembelajaran untuk memacu keberhasilan siswa di kelas. Translated by Sigit Prawoto. Yogyakarta: Familia (Grup Relasi Inti Media).

Shirley, A.C., Chijioke, O.P. & Chukwumaijem, O.B. (2015). Challenges and Improvement Strategies. Journal of Education and Learning, 4(1). ISSN 1927-5250, E-ISSN 1927-5269. Published by Canadian Center of Science and Education Towards Quality Technical Vocational Education and Training (TVET) Programs in Nigeria.

Tether, B. S. (2005). Do services innovate (differently)?: Insights from the European innobarometer survey. Industry and Innovation, 12(2), 153–184.

Wafroturrohmah (2018). Upaya peningkatan life skill dan nilai entrepreneur melalui pembelajaran teaching factory pada era millineal. Seminar Nasional Pendidikan 2018. Universitas Muhammadiyah Surakarta, 122-131.

Wagner, U., AlGeddawy, T., ElMaraghy, H., Müller, E. (2012). The State-of-the-art and prospects of learning factories. Procedia CIRP 2012, 3, 109-114.

Wijaya, M. B. R (2013). Model pengelolaan teaching factory di Sekolah Menengah Kejuruan. Jurnal Penelitian Pendidikan, 30(2).

DOI: http://dx.doi.org/10.26737/jetl.v5i1.1823

Refbacks

There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Published by:

Institute of Managing and Publishing of Scientific Journals STKIP Singkawang

Sekolah Tinggi Keguruan dan Ilmu Pendidikan (STKIP) Singkawang

Address : STKIP Singkawang, Jalan STKIP - Kelurahan Naram Singkawang, Kalimantan Barat, INDONESIA, 79251
No. Telp. : +62562 420 0344
No. Fax. : +62562 420 0584

JETL (Journal of Education, Teaching, and Learning)

e-ISSN : 2477-8478

p-ISSN : 2477-5924