Evaluasi dan Perancangan Ulang Tata Letak Gudang PT X dengan Metode Class Based Storage

Kamilia Puteri Juliani; Tetty Herawaty; Raden Marsha Aulia Hakim

doi:10.26737/jtmb.v11i2.7582

Evaluasi dan Perancangan Ulang Tata Letak Gudang PT X dengan Metode Class Based Storage

Kamilia Puteri Juliani, Tetty Herawaty, Raden Marsha Aulia Hakim

Abstract

This research aims to optimize the storage layout in the warehouse of PT X Bekasi Branch through the application of the class-based storage method with ABC analysis. Currently, the placement of stock is still done randomly which causes difficulties in finding goods, as well as long distances and travel times in retrieving goods. This study was conducted for three months from September to November with a qualitative descriptive method. The stages of the class-based storage method are determining the location based on the class where class A (fast moving) must be close to the entrance and exit access, class B (medium moving) does not have to be so close and class C (slow moving) can be very far. The results of this study show a reduction in distance and travel time with a total average distance of 1,361 cm, a percentage of 11.01% and a reduction in time of 20.01%. In addition, it also obtains a class division to determine the distance to the outbound access into 3 categories, namely the fast moving category of 22 items, medium moving of 11 items and slow moving of 11 items

Keywords

class based storage, layout, analisis ABC, jarak, waktu

Full Text:

PDF

References

Daeng Polewangi, Y., Sinulingga, S., & Nazaruddin. (2015). Perencanaan ulang layout dalam upaya peningkatan utilisasi kapasitas pengolahan di PT XYZ. Malikussaleh Industrial Engineering Journal, 4(1).

Febrianty, I. D., Adhiana, T. P., & Waluyo, S. (2021). Usulan Tata Letak Penempatan Finished Goods dengan Kebijakan Class Based Storage Berdasarkan Analisis ABC di PT. XYZ. Dinamika Rekayasa, 17(2), 115-125.

Fitri, M., & Putri, D. I. (2021, Januari 31). Usulan Rancangan Tata Letak Gudang Penyimpanan Kantong Semen Menggunakan Metode Shared Storage. Jurnal Teknologi dan Informasi Bisnis, 3(1), 228-233.

Heizer, J., Render, B., & Munson, C. (2019). Operations Management: Sustainability and Supply Chain Management, Global Edition. Pearson.

Hidayat, N. P. A. (2012, Maret). Perancangan Tata Letak Gudang dengan Metoda Class-Based Storage Studi Kasus CV. SG Bandung. Jurnal AL-AZHAR INDONESIA SERI SAINS DAN TEKNOLOG, 1(3), 105-

Isnaeni, N. S., & Susanto, N. (2021). Penerapan Metode Class Based Storage Untuk Perbaikan Tata Letak Gudang Barang Jadi (Studi Kasus Gudang Barang Jadi K PT Hartono Istana Teknologi). Industrial Engineering Online Journal, 10(3).

January, T. D., & Harimurti, C. (2021, April). PENGARUH TATA LETAK GUDANG TERHADAP KELANCARAN PRODUKTIVITAS BONGKAR MUAT DI GUDANG PT. NCT. Jurnal Logistik Indonesia, 5(1), 55-64.

Jermsittiparsert, K., Sutduean, J., & Sriyakul, T. (2019). Role of Warehouse Attributes in Supply ChainWarehouse Efficiency in Indonesia. InInternational Journal of Innovation, Creativity and Change.www.ijicc.net(Vol. 5, Issue 2). www.ijicc.net

Johan, & Suhada, K. (2018). Usulan Perancangan Tata Letak Gudang dengan Menggunakan Metode Class-Based Storage (Studi Kasus di PT Heksatex Indah, Cimahi Selatan). Journal of Integrated System, 1(1), 52-71.

Meldra, D., & Purba, H. M. (2018, November). Relayout Tata Letak Gudang Barang Dengan Menggunakan Metode Dedicated Storage. Jurnal Rekayasa Sistem Industri, 4(1), 32-39.

Mulyati, E., Numang, I., & Nurdiansyah, M. A. (2020, November). Usulan Tata Letak Gudang Dengan Metode Shared Storage di PT Agility International Customer PT Herbalife Indonesia. Jurnal Logistik Bisnis, 10(02), 36-41.

Rosihin, Ma’arij, Cahyadi, D., & Supriyadi. (2021, Desember). Analisa Perbaikan Tata Letak Gudang Coil dengan Metode Class Based Storage. Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(2), 166-172.

Sinambela, L. P. (2014). Metodologi Penelitian Kuantitatif: Untuk Bidang Ilmu Administrasi, Kebijakan Publik, Ekonomi, Sosiologi, Komunikasi dan Ilmu Sosial Lainnya. Bumi Aksara

Suntoro. (2020). Fundamental Manajemen Logistik: Fungsi-Fungsi Logistik dalam Implementasi dan Operasi. Kencana

Wirawati, S. M., Arthawarti, S. N., & Opandi, O. (2017, Oktober). Perbaikan Tata Letak Penyimpanan Spare Part Mesin Produksi dengan Metode Class Based Storage Pada Gudang PT. Ultra Prima Plast. Tirtayasa Ekonomika, 12(2), 340-349.

DOI: http://dx.doi.org/10.26737/jtmb.v11i2.7582

Refbacks

There are currently no refbacks.

Published by:

Institute for Managing and Publishing of Scientific Journals STKIP Singkawang

JTMB (Jurnal Terapan Manajemen dan Bisnis)

e-ISSN : 2477-5282

p-ISSN : 2599-3127

Sekolah Tinggi Keguruan dan Ilmu Pendidikan (STKIP) Singkawang

Address : STKIP Singkawang, Jalan STKIP - Kelurahan Naram Singkawang, Kalimantan Barat, INDONESIA, 79251
No. Telp. : +62562 420 0344
No. Fax. : +62562 420 0584